20-40KA 2P AC SPD
Ürün Açıklaması
AC SPD, AC 50/60Hz TT, TN-S, TN-C, IT, TN-CS ve benzeri güç kaynağı sistemlerinde uygun şekilde kullanılır,<380V, installation om the joint of LPZ1 or LPZ2 and LPZ3, it adopts 35mm standard rail, there is a failure release mounted in the module of surge protection device. When the SPD fails in breakdown for over-hart and over-current, the failure release will help electric equipment separate from the power supply system and give the indication signal, green means normal, red means abnormal, it also could be replaced for the module when has operating voltage.
Teknik parametreler | FSP-A | |||||
Nominal Çalışma Gerilimi Un(V~) | 380V/220V | |||||
Maksimum Sürekli Çalışma Gerilimi Uc(V~) | 275V | 320V | 385V | 385V | 385V | 420V |
Voltaj koruması Seviye Yukarı(V~)kV | 1'den küçük veya 1'e eşit.0 | 1.2'den küçük veya eşit | 1.8'den küçük veya eşit | 2'den küçük veya eşit.0 | 2.2'den küçük veya eşit | 2.8'den küçük veya eşit |
Nominal Deşarj Akımı ln (8/20s)kA | 5 | 10 | 20 | 30 | 40 | 60 |
Maksimum Deşarj Akımı lmax(8/20s)kA | 10 | 20 | 40 | 60 | 80 | 100 |
Tepki Süresi (ns) | <25 | |||||
Test Standardı | IEC61643.1, GB18802.1 | |||||
Çalışma Ortamı (santigrat) | -40 derece ~ artı 85 derece | |||||
Maksimum Bağlantı Hattı | 35mm2 sert tel/35mm2 telli tel bakır hat | |||||
Önerilen Bağlantı Hattı | 16mm2 sert tel/25mm2 telli tel bakır hat | |||||
Kurulum | Standart Ray 35mm | |||||
Dış Kaplama Malzemesi | Yanmaz Naylon | |||||







Popüler Etiketler: 20-40KA 2P AC SPD, Çin, üreticiler, tedarikçiler, fabrika, fiyat
Bir çift
20-40KA 1K AC SPDSonraki
20-40KA 3P AC SPDBunları da sevebilirsiniz
Soruşturma göndermek
























